How do I set up and add computers to my network?

Set up and Add Computers to My Network

Enjoy connectivity with your computers by simply following these steps to add them to your network. There are (3) three different ways of adding computers to the network:

• Connecting to the Network 
• Manually creating a Network profile 
• Adding it using the WPS button 

Connecting to the Network

Step 1: Locate the Wireless Network Connection option on your computer and select your Belkin router's wireless network name. Locate the Wireless Network Connection option on your computer and select your Belkin router's wireless network name.

Step 2: Click Connect.

Step 3: Enter your Security key or Network password from the network information card and click OK.

Manually creating a Network profile
Step 1: On your computer’s Network and Sharing Center select Manage wireless networks.

Step 2: On the Manage wireless networks page, click Add.

Step 3: On the How do you want to add a network? pop-up, click Manually create a network profile.

Step 4: You may now enter the information of the wireless network you want to add. The information entered should match the wireless network’s information. After filling in the information needed, click Next to add your wireless network.

Adding it using the WPS button

Step 1: Locate and activate the Wi-Fi Protected Setup™ Push Button Connection (WPS PBC) on the computer you wish to add to your network. Refer to your computer's user manual if you need help locating the WPS PBC.

Step 2: Within two (2) minutes of activating the WPS PBC on your computer, press the WPS button below the green status light on the front panel of your router.

NOTE: The small WPS light just above the WPS button (not to be confused with the green status light) shows what is happening while the router establishes a connection.

• Off: Idle 
• Blinking Green: The router is listening for a WPS-enabled computer. 
• Solid Green: The router has made a secure connection with the WPS-enabled computer. 
• Blinking Amber: A connection was not made. 

Step 3: Repeat this process for each WPS-enabled computer you'd like to add to your network.

Our Belkin router customer service number is 1-888-989-8478.